78
•
Manual.
Prints a single tile. You set the top left corner of the tile by positioning the zero
point of the rulers. The Overlap value isn’t available for Manual because only one sheet is
printed.
•
Overlap.
Specifies how much of each tile edge is repeated along the edge of any adjacent
tiles. This option defaults to a value of 9 picas.
����
������
���� ���������
Tiling options: Auto tiles from the upper-left corner using the Overlap value. Auto Justified fits to outer
printable edges of media by increasing overlap. Manual lets you set the position of each tile individually.
Note:
Tiling adds tile marks to each sheet. This adds to the total print area required to output
all sheets.
Cre at i ng a c u stom page s i ze
The unit of measure for a custom page size is the one specified in the InDesign Edit >
Preferences dialog box. You can override the units by using standard abbreviations as
described in the online Help file (for example, enter 12i or 12" for 12 inches, or 612pt for 612
points).
To create a custom page size:
1. In the Print dialog box panel list, click Setup.
2. Choose Custom from the Paper Size menu. The Custom option is available only if custom
paper sizes are enabled in the device’s PPD.
