Adobe 65029940 - Captivate - PC, User Manual

Page: 149 / 408

139
ADOBE CAPTIVATE 3
User Guide
Settings
Click to open the Audio settings dialog box to specify audio settings such as input source, quality level,
and calibration.
Fade in [#] seconds
Specifies the number of seconds for audio to fade in to full volume.
Fade out [#] seconds
Specifies the number of seconds for audio to fade out to silence.
The following options are on the Size and Position tab:
Position in pixels
Set the position of the image on the slide by entering a number or using the arrows, for the
left and top positions.
Size in pixels
Set the size of the image by entering the value for height and width. You can type the number or
use the arrows to change the number upward or downward.
Constrain proportions
Select this option to lock the image proportion.
7
Use the Settings menu to select how to apply property changes in the project. To apply all your changes, select
Apply only changed properties. To apply all image settings, select Apply all properties. You can apply the image
settings to the current slide only or to all slides.
Note: If you change the settings in this dialog box, they become the default settings and any new images you create
use the new settings.
8 Click the Apply to all button to apply the settings specified from the Settings menu.
9
Click OK.
Tip:You can create a watermark image using a transparency trick. Just insert an image and set the transparency to
50%. This works very well with many company logos.
Adding rollover images
Rollover images are unique. They consist of an image and a rollover area (the “hot” area). Rollover images appear
when the end user moves the mouse over the hot area at runtime. They are useful for heavily detailed slides or for
slides that contain buttons or toolbars that require explanation.
You can use the same type of graphics for rollover images that you use for traditional images. You can also
customize the location, outline, and size of the rollover area for rollover images.
To add a rollover image:
1 Open an Adobe Captivate project.