User manual MKA 120
Conforms to
Issue 07.07.2021_01 Page 32
9.5 Version number display
This code setting allows you to see the software version of the controller. You need the version
number in case you have to contact the manufacturer.
9.6 Sensor information
Information concerning sensor configuration is shown under
code setting „ Sensor info”. This page is
for information only and changes to the settings cannot be made on this page.
If several sensors are assigned to one measured variable, the lowest, highest and average values are
used for the regulation process and are displayed. (
it depends on the configuration
) This means it is
not always immediately obvious which measured value is used for regulation. You can look at the
actual values of the sensors
(separately
) under code setting „Sensor info“.
Hint
*QR-Code:
Many mobile phones and
PDAs have an integrated camera
and Software that can recognise QR-
codes. If you scan the code the
aditec homepage can be opened.
Here you will find the current user
manual for
„MKA120“.
Version and date of
the controller
Serial number
of the contoller
QR-Code*
Code number
Sensor information
Sensor E1
Code number
Sensor information
Sensor E2
3 Sec.
Version
Profiles
3 Sec.
Senso rinfo
Profiles
