User manual MKA 120
Conforms to
Issue 07.07.2021_01 Page 18
6
Standby
As soon as the controller is connected to a power source it will automatically boot up. This can take up
to 1 minute.
Be aware
Please do not use pointy objects to operate the controller (e.g. pointed fingernails, ball
points sharpened pencils or screw drivers). Only use blunt, soft objects, as e.g. your finger
tips or a rubber or similar objects.
In the standby mask the current acutal and nominal values are shown as will as the current program
and step numbers.
Program and step are displayed in standby and operation.
e. g.:
Operating mode - program number: program name - step number: process name
Standby
– P01:P1 – S01: Operation
Operation
– P02:P2 – S03: Operation
Hint
Use the „Line“ button to skip between the program and step display.
Hint
During a data transfer between the PC and the controller the standby mask is hidden and an
information page is shown.
Figure 7: Standby
Actual value
Chamber temperature/
Short cut buttons
Time of day/
Status bar
Program/ Step
number
Actual value
Core temperature/
Short cut buttons
Step time/ Operating time time
Nominal values (chamber, FC-value,...)
Nominal values (core, FC-value,...)
Nominal time value
Unit (°C / °F)
Unit (°C / °F)
Figure 8:
Data Update
