User manual MKA 120
Conforms to
Issue 07.07.2021_01 Page 30
Automatic change-over summer/winter time
The automatic change-over summer/winter time is active when the check box
„Daylight Time“ has
been activated.
This means the clock is moved forward one hour at 2:00a.m. on the last Sunday in March and
moved back one hour at 3a.m. on the last Sunday in October:
Hint
- The change-over of the clock can only occur when the controller is in standby mode
- The day of the week (last Sunday) is automatically calculated from the date.
9.2 Status bar display (status bar)
Changing the display settings of the status bar in the operation window.
When a value has been activated you can,
during operation
, use
the arrow buttons „up“ or
„down“ to skip between values on the status bar.
Be aware
Skipping between values on the status bar is not possible while you are entering values.
Display of program progression: (from V20.11)
The progression of the program will be shown on the status bar as a progression bar.
The total program runtime or remaining program runtime ( total time of all program steps),
respectively will be shown graphically.
Display as a percentage (from V20.11)
The remaining program runtime will be shown as time / percentage value of the total program
runtime.
Show the value on the status
bar
Code number
3 Sec.
Status bar
Profiles
Program runtime
Remaining program runtime
Program runtime
Remaining program runtime
