User manual MKA 120
Conforms to
Issue 07.07.2021_01 Page 20
7.2 Program start
7.2.1 Starting from standby
7.2.2 Starting from programming mode
7.2.3 Starting a program with a batch number
Once you have selected a program and have entered the relevant nominal values, the program can
be started with the
„Start/Stop“ button
.
If the
„Batch no.“ function is enabled, the controller is now going to ask for a batch description.
Hint
A batch number
has to be
entered when this feature has been enabled or the program
cannot
be started. The batch description can consist of up to 10 characters.
By pressing the
„Line“ button for about 3 seconds you can terminate the starting process.
Changing optional
nominal values
LED flashing
Nominal value
is flashing
8
Saving nominal
value LED off
LED flashing
LED is lit up / Temperature is regulated
wird geregelt
Relay states are shown
He(Heating on) | Co(Cooling off) | Si(Signal off)
Info bar (Alarms, batch number,...)
LED is lit up / Temperature is regulated
Relay states are shown
He(Heating on) | Co(Cooling off) | Si(Signal off)
Info bar (Alarms, batch number,...)
Prg:
Stp:
Figure 9:
Entering a batch number
Starting a
program
starten
3 Sec.
Cursor
movement
right/left
Entering a
batch no
