ADEMCO 8132, Installation And Setup

Page: 74 / 88

Symphony/Symphony-i Installation and Setup Guide
8-14
ACTION SCREEN
NOTE: If no touch is made within 5 seconds,
No Touch Detected.. Try Again. is displayed
in the center of the Touch Screen Calibration
screen.
Symphony/Symphony-i LED Operation
Your Symphony/Symphony-i has four LEDs that are labeled: WEB (yellow), ARMED (red),
READY (green), and MESSAGE (yellow). The status of each of these LEDs indicates specific
operational states. These states are:
•
Normal (idle)
•
Software download
•
Software download - Failure Modes
Each LED can have four different status indications: ON, OFF, FAST BLINK, and SLOW
BLINK. All LEDs do not use all of the above states. Details are provided below.
LEDs During Normal (Idle) State
LED DESCRIPTION
WEB ON – Connected to Internet.
OFF – Not connected.
FAST BLINK – Either sending or receiving data.
SLOW BLINK – Connecting to server (BB) or dialing to RAS server (DU).
ARMED ON – Security system is armed.
OFF – Security system is not armed.
READY ON – Security system is disarmed and ready to arm.
OFF – Security system is disarmed but not ready. Faults/troubles present.