ADEMCO 8132, Installation And Setup

Page: 26 / 88

Symphony/Symphony-i Installation and Setup Guide
4-12
To change the address, perform the following.
SCREEN ACTION
1. On the “Central Station” screen press the
ECP Address button. A pop-up window is
displayed with options for selecting
Symphony/Symphony-i's ECP address.
2. The available ECP addresses are 1-6 for
commercial controls (e.g., Vista-128BP) and 1-
2 for residential controls (e.g., Vista-20PS).
Select the ECP address for this
Symphony/Symphony-i using the Up/Dn
arrows. Press the OK button to accept the
address setting or the CANCEL button to
maintain the original ECP address.
Symphony/Symphony-i goes to the "Central
Station" menu screen.
3. Press the "Back" icon twice to save the new
address. The "More Choices" screen is
displayed.