ADEMCO 8132, Installation And Setup

Page: 23 / 88

Section 4: Initial Setup
4-9
SCREEN ACTION
13. Enter 1 (YES) to identify this device as an
AUI (Symphony/Symphony-i). The screen will
prompt for the next Device Address to be
programmed.
14. Enter the next address to be programmed
to enable another ECP device. When
Finished, enter 00, then
✶
. The QUIT MENU
MODE? screen is displayed.
15. Enter 1. The Program Mode screen is
displayed.
16. From this screen you can enter
✶
99 to
return to the Console Mode screen.
NOTE: When programming mode is exited,
Symphony/Symphony-i will reset within 2
minutes. If Symphony/Symphony-i is being
used with a Vista-20PS or equivalent control
panel, it will immediately reset.