1-3
Introduction
The
Adaptec Storage Manager Pro User’s Guide
is provided with the
DuraStor RAID appliance and DuraStor 6220SS/7220SS, and is
also available on the DuraStor CD. See
Installing Storage Manager
Pro
on page 3-55
for details.
Adaptec Disk Array Administrator
If you are using an operating system other than Windows NT
®
or
Windows
®
2000, you need to use Disk Array Administrator to
manage your storage subsystem.
Disk Array Administrator is firmware built into the
DuraStor 6200S/7200S RAID controller BIOS, and can be accessed
using the RS-232 serial port connection on the rear panel of the
DuraStor RAID appliance. See
Accessing Disk Array Administrator
on page 3-56
for detailed instructions.
You can find the
Adaptec Disk Array Administrator User’s Guide
on
the DuraStor CD.
The Operator Control Panel
If you don’t have a computer monitor available and cannot use one
of the user-friendly applications, the alternative is the Operator
Control Panel (OCP) located on the front bezel of the DuraStor
RAID appliance. It can be used to perform most of the functions
required to monitor your storage devices and create and manage
arrays and spares.
You can find the
DuraStor RAID Appliance Operator Control Panel
User’s Guide
on the DuraStor CD.
For more information, see
Appendix B,
The Operator Control Panel of
the DuraStor RAID Appliance
.
DuraStor IUG.book Page 3 Wednesday, January 30, 2002 10:49 AM