3-57
Installing the DuraStor Storage Subsystem
Note:
If you are using HyperTerminal as your terminal
emulator software, you must be using HyperTerminal
Private Edition (HTPE) 6.3 for the up and down arrow
(
↑
or
↓)
keys to work.
If you are not using HTPE 6.3, you can download it for free
at
www.hilgraeve.com/htpe/index.html.
Configure the RS-232 serial port in your terminal emulator
software using the settings in
Table 3-4
.
Set the communications parameters for the terminal program as
shown in
Table 3-5
.
To access Disk Array Administrator:
1
On the I/O connectivity panel of the DuraStor RAID appliance,
turn the switch to E
XT
.
2
On the DuraStor RAID appliance Operator Control Panel, use
the arrow buttons to:
a
Choose
Hardware Menu
, then press
Enter
.
b
Choose
Mode
, then press
Enter
.
Table 3-4 RS-232 Serial Port Settings
Setting
Value
Terminal Emulation
VT-100 or ANSI (for color support)
Font
Terminal
Translations
None
Columns
80
Table 3-5 Communications Parameter Settings
Setting
Value
Baud Rate
115,200
Data Bits
8
Stop Bits
1
Parity
None
Flow Control
None
Connector
COM1 (typically)
DuraStor IUG.book Page 57 Wednesday, January 30, 2002 10:49 AM
