manualshive.com logo in svg

Adaptec DuraStor 6220SS, Installation And User Manual

Share
Download
Adaptec DuraStor 6220SS Installation And User Manual Download Page 117

6-1

6

Troubleshooting

In This Chapter

This chapter provides answers to many frequently asked questions. 
If a situation occurs that is not covered in this chapter, or if these 
recommendations do not correct the problem, contact Adaptec 
Technical Support.

Please refer to the user’s guide for the storage management tool 
you are using (Storage Manager Pro, Disk Array Administrator, the 
OCP of the DuraStor RAID appliance) for help troubleshooting 
problems with your storage management software tool.

Problems with the DuraStor RAID Appliance

The RAID appliance fails to power on.

Verify that the power cables are properly connected to the PSUs.

Verify that power to the outlet has not been interrupted.

If necessary, replace the power cables. If the DuraStor RAID 
appliance still fails to power on, contact Adaptec Technical 
Support.

Problems with the DuraStor RAID Appliance

6-1

Problems with the DuraStor 312R Storage Enclosure

6-2

DuraStor IUG.book  Page 1  Wednesday, January 30, 2002  10:49 AM

Summary of Contents for DuraStor 6220SS






































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands