4-14
Ultra160 Family Manager Set User’s Guide
2
When
sbackup
is loaded, it asks for a
login name
. Enter the
appropriate name.
3
If
sbackup
asks you to select the device driver, select the
HP
DIBI-2 Tape Driver
, regardless of the type of SCSI tape drive
being attached (e.g., even if the tape drive is manufactured by
Wangtek, do not select the Wangtek driver).
Note:
Novell also includes a driver called
adaptec.nlm
.
This driver is not needed and should not be loaded.
Adaptec’s driver module takes advantage of ASPI
interface features bypassed by
adaptec.nlm
.
Novell publishes a list of SCSI tape drives supported by
sbackup.nlm
.
Using a CD-ROM with NetWare
To use a CD-ROM with NetWare, follow these instructions:
1
Load
adpt160m.ham
by entering the following line:
:load [
pathname
]adpt160m
2
The
scsicd.cdm
driver will auto-load if the device(s) are
detected.
Note:
For multiple LUN CDs, enable multiple LUN
scanning with the
lun_enable
switch (e.g.,
load
adpt160m lun_enable=FF
). The
lun_enable
switch is
needed for
adpt160m.ham
.
Enter the following line at the prompt:
scan all luns
