2-16
Ultra160 Family Manager Set User’s Guide
[xxxxx097] Unable to allocate memory
This indicates that there may be a problem with the amount of
memory installed in your system. Verify that your system has at
least the minimum amount of memory required by your operating
system.
[xxxxx0af] Unable to de-allocate memory that was allocated for a target device
Normally, this is not a serious problem, unless you get this message
frequently over a short period of time. The memory can be
reclaimed by rebooting the system.
[xxxxx0ce] Scatter/gather limit exceeded
An I/O request packet from the system contained a Scatter/Gather
element list that contained more elements than are supported by the
miniport. Scatter/Gather is a list of data segments that define the
entire data transfer. Scatter/Gather is a means to improve total data
throughput. This error might be caused by a component external to
the miniport driver, such as the operating system or an ASPI
application.
[xxxxxd4] Adapter hardware failure - adapter reset
The host adapter hardware failed and the miniport has to reset the
hardware.
[xxxxx0d6] Internal driver error
An error has occurred while the driver was setting up its internal
data structures. Try installing the most up-to-date version of the
driver available from the Adaptec Web site.
❒
