2-9
Microsoft Windows NT Installation
Follow the instructions below to enable Hot-Plug PCI support in the
driver:
1
Insert the Ultra160 Family Manager Set disk for Windows into
drive A.
2
Select Run from the Start menu.
3
Type
a:\nt4\hotp160m.reg
and press Enter.
4
Click OK.
5
Reboot the system.
Note:
The file
hotp160m.reg
adds Hot-Plug related entries
into the NT Registry, including the driver-specific registry
value
/HOTPLUG
. Running
hotp160m.reg
will overwrite
your current driver-specific registry values located at:
\HKEY_LOCAL_MACHINE\System\CurrentControlSet\
Services\adpu160m\Parameters\Device\DriverParameters
If you have previously added other driver specific registry
values, you should note them before running the
hotp160m.reg
file. After running
hotp160m.reg
, you may
verify and restore those previously added driver-specific
registry values, if needed.
