4-10
Ultra160 Family Manager Set User’s Guide
lun_enable=
1
0-FF
01
A bit mask to enable
scanning for specific
LUNs on all targets. The
default value of 01 causes
the driver to scan LUN 0
only. This enable bit mask
is entered in hex (see Bit
Mask Options on
page 4-11.)
max_tags=
1-128
16
Specifies maximum
number of tagged
commands per device.
multlun_targets=
0-FFFF
FFFF
A bit mask to enable
LUNs on selected targets.
By default, LUNs on all
targets are enabled. This
bit mask is entered in hex
(see Bit Mask Options on
page 4-11).
slot=
0-xxxx
2
0
Defines a physical slot
number for the host
adapter. If 0 is specified, or
if this option is not
specified, then the driver
loads for all Ultra160
Family host adapters.
verbose=
yes, no
no
Displays host adapter
configuration information
at load time.
1
Many multiple-LUN and removable-media devices are changers or magazines.
Some of these are only supported by the driver through an ASPI driver provided by
the hardware vendor.
2
The values can vary and are dependent on the system configuration.
Option
Values
Default
Description
