2-15
Microsoft Windows NT Installation
[xxxxx023] Target device parity error
The driver has detected a parity error by the target device.
[xxxxx024] Data overrun or underrun
The adapter was given more or less data than the expected amount
of data.
[xxxxx031] Target device queue full
The target device internal buffer is full.
[xxxxx032] Target device busy
The target device reports a Busy status. Another program may
already be using this device.
[xxxxx050] Host adapter failure
[xxxxxx9A] Host adapter failure
Your host adapter may not be properly installed or is defective. Try
resetting the adapter in the PCI slot, or try installing it a different
PCI slot.
[xxxxx081] Adapter initialization failure
[xxxxxx8A] Adapter initialization failure
[xxxxxx83] Adapter initialization failure
An error has occurred while the driver was setting up its internal
data structures. Verify that your adapter is supported by this version
of the driver.
[xxxxx089] Unable to allocate memory
This indicates that there may be a problem with the amount of
memory installed in your system. Verify that your system has at
least the minimum amount of memory required by your operating
system.
[xxxxx096] Adapter hardware initialization failure—possible resource conflict
The driver has attempted to initialize the adapter hardware but
failed. This might suggest that the adapter resources (e.g., IRQ)
conflict with another board installed in your system.