5-5
UnixWare Installation
5
Type
pkginfo -l adstxx
and press Enter.
6
Verify that the
adst21
or
adst70
driver is now listed.
If the
adst21
or
adst70
driver does not appear in the
pkginfo
listing, turn to Troubleshooting on page 5-9.
The listing should be similar to
PKGINST: adst21
NAME: Ultra160 Driver for UnixWare 2.1x
or
PKGINST: adst70
NAME: Ultra160 Driver for UnixWare 7.1
Modify the New System File
1
Display the contents of the
adst21
file by typing the following
and pressing Enter:
For UnixWare 2.1x:
cat /etc/conf/sdevice.d/adst21
For UnixWare 7.1:
cat /etc/conf/sdevice.d/adst70
2
If your computer is to boot from a device connected to a
Ultra160 Family host adapter, verify that the line
$static
is
present immediately below the line
$version 2
.
3
If your computer is not to boot from the host adapter SCSI bus,
and you wish to leave the driver as a loadable module, edit
and verify that the line
$static
is not present directly below the
line
$version 2
.
