2-14
Ultra160 Family Manager Set User’s Guide
adpu160m.sys Error Messages
The following error messages are listed sequentially according to the
last three digits of the error message. For example, [xxxxx010],
[xxxxx011], [xxxxx012], etc.
Note:
When reporting problems to Customer Support, be
sure to include the complete error message in your problem
description.
[xxxxx004] Command completed with error
[xxxxx005] Command completed with error
[xxxxx006] Command completed with error
A request issued to a target device completed with indication that
there is an error. In most cases, the error is recovered and normal
operations continues.
[xxxxx010] Error issuing command
An error has occurred while the driver was setting up its internal
data structures.
[xxxxx011] Error issuing command
The requested command is not supported by this driver.
[xxxxx012] Error issuing command
[xxxxxx99] Error issuing command
The driver does not recognize the target device.
[xxxxx021] Target device protocol error
An unexpected event occurred during data transfer between the
adapter and target device. Normally, this indicates a faulty or non-
compliant target device.
[xxxxx022] Adapter or target device protocol error
The adapter or target device has broken the communication
protocol. A badly behaving device could cause this message to
appear. Normally this is not a serious problem. If you get this
message frequently over a short period of time, it could indicate that
the device or system is malfunctioning. Unplug or power down
unused devices to see if the problem persists.
