4-8
Ultra160 Family Manager Set User’s Guide
Loading the Driver at Server Bootup
To automatically load the
adpt160m.ham
at server bootup, the
startup.ncf
file (usually located in your server’s startup directory)
must contain a
load
command line that specifies the location of the
driver and any appropriate command line options (see Using the
Load Command Line Options on page 4-9). For additional information
on the
startup.ncf
file, refer to your NetWare documentation.
The correct syntax to load the driver is
load [
pathname
]adpt160m.ham [
options
]
For example, the command line to load the driver from the
c:\nwserver
directory, with the
verbose=
option on is
load c:\nwserver\adpt160m verbose=y
Command line options are not case sensitive. Placing commas
between command line options is optional. See Using the Load
Command Line Options on page 4-9 for possible values.
To modify the
startup.ncf
file, follow these steps:
Note:
You can also use your DOS text editor to modify the
startup.ncf
file.
1
Type
load install
at the NetWare prompt and press Enter.
2
Select the appropriate menu choice that allows you to edit the
startup.ncf
file.
3
Make the necessary changes. When you are done, press Esc.
