5-4
Ultra160 Family Manager Set User’s Guide
Back Up the Computer
If you have not already done so, back up all important files on the
computer. See your UnixWare documentation for proper UnixWare
file system backup procedures.
1
Log in as root at the UnixWare # system prompt.
2
To back up the old UnixWare kernel, type the following and
press Enter:
cp /stand/unix /stand/unix.work
Load the Package
To load the driver, follow these steps:
1
At the system prompt, type the following and press Enter:
pkgadd -d diskette1
Follow the instructions on-screen to insert the IHV HBA disk
(or Ultra160 Family Manager Set disk for UnixWare 2.1x or
UnixWare 7.01/7.1) into the boot floppy disk drive.
2
Select the
adst21
or the
adst70
package from the on-screen
menu and press Enter. The package is loaded into your
UnixWare operating system.
3
When the package has loaded, you may be prompted to install
the disk again.
Do not reinsert the IHV HBA disk (or Adaptec Ultra160 Family
Manager Set disk for UnixWare 2.1x or UnixWare 7.01/7.1).
Instead, type
q
(quit) and press Enter.
4
Type
and press Enter. The mail messages tell you if the
installation was successful.
If a mail message informs you that the installation has failed,
turn to Troubleshooting on page 5-9.
