2-6
Ultra160 Family Manager Set User’s Guide
■
Maximum SGList
— Specifies the maximum number of
Scatter/Gather elements. Valid values are 17-255. The data
type for this value is
REG_DWORD
.
To enter Windows NT parameters, follow these steps:
1
Select Run from the Start button.
2
Type
regedt32
and press Enter.
3
Open the registry list to the following location:
\HKEY_LOCAL_MACHINE\System\CurrentControlSet\
Services\adpu160m\Parameters\Device
If the Parameters Device keys already exist, skip to Step 8
below to begin entering values. If the keys do not yet exist, you
will need to create them by continuing with Step 4.
4
Click on the adpu160m key.
5
Select Add Key from the Edit menu; Type
Parameters
in the
Key Name edit box. Leave the Class edit box blank.
6
Click on the Parameters key.
7
Select Add Key from the Edit menu; Type
Device
in the Key
Name edit box. Leave the Class edit box blank.
To specify a certain host adapter, append
Device
with the
number of the host adapter. For example, type
Device0
for the
first host adapter,
Device1
for the second, etc. If you omit the
host adapter number, the configuration information applies to
all Ultra160 Family host adapters.
8
Click on the Device key.
9
Select Add Value from the Edit menu. In the Value Name edit
box, enter one of the valid parameter values. Make sure to
enter the appropriate data type for the value. To enter
additional values, repeat Steps 8 and 9.
Note:
Changes made with the Registry Editor do not take
effect until you shut down and then restart your system.
