Adam GBK 150Mplus, Manual

Page: 14 / 44

© Adam Equipment Company 2020
14
8.0 BACKLIGHT
•
The backlight for the LCD can be set by the user to always off, always on or
automatic (on only when the indicator is in use or a key is pressed). See setting of
the parameter
“
S2 bL
”
in section 13.3.
•
The default backlight colour can be defined to White, Green, Red, Amber and Blue.
Once defined to one of these colours, the backlight will still change colours during
Check Weighing, and Check Counting, on all other situations it will illuminate
according to the user selection. See setting of the parameter
“
S2 bL
”
in section 13.3.
•
The intensity of the backlight can also be defined, there are three settings to choose
from, Low, Mid and High
.
9.0 AUTO POWER OFF
The auto power off can be set by the user to disable the feature or to a pre-set time
interval. See setting of the parameter “S3 AoF“ in section 13.3.
10.0 OPERATION
10.1 ZEROING
•
You can press the [Zero] key at any time to set the zero point from which all other
weighing and counting is measured. This will usually be necessary when the
platform is empty. When the zero point is obtained the display will show the zero
indicator.
•
The scale has an automatic re-zeroing function to account for minor drifting or
accumulation of material on the platform. However, you may need to press [Zero]
to re-zero the scale if small amount of weight is still shown when the platform is
empty.