© Adam Equipment Company 2020
15
10.2 TARING
10.2.1 Manual tare
•
Zero the scale by pressing [Zero]. The zero indicator will be on. Place a container
on the platform and its weight will be displayed.
•
Press [Tare] when the reading is stable. The weight that was displayed is stored as
the tare value and it is subtracted from the display, leaving zero on the display. The
stable and Net indicator will be on.
•
As a product is added only the weight of the product will be shown. The scale could
be tared a second time if another type of product was to be added to the first one.
Again only the weight that is added after taring will be displayed.
NOTE:
When the container is removed a negative value will be shown. If the scale was tared just
before removing the container, this value is the gross weight of the container plus all
products which were removed. The zero indicator will also be on as the platform is back to
the same condition it was when [Zero] was pressed last.
Press [Tare] or [Zero] to remove the tare value and display zero. The Net indicator will
disappear.
Summary of Contents for GBK 150Mplus
Page 1: ...Adam Equipment GBK Mplus GFK Mplus Series...
Page 3: ......
