Adam GBK 150Mplus, Manual

Page: 24 / 44

© Adam Equipment Company 2020
24
10.8.1 ANIMAL WEIGHING PROCEDURE
•
With the platform empty the display will show zero weight. Place containers or
blankets onto the platform and press the [Tare] key to zero the display. The scale
may go into the animal weighing procedure when the items are placed on the scale
but will return to showing zero when the [Tare] key is pressed.
•
Place the animal to be weighed on the platform.
•
When a stable reading is found, the display will show this value, and the display will
be locked until the [Unit] key is pressed. The display will show the “Hold” symbol
while the display is locked. Remove the animal, the display will hold the weight
value.
•
Press the [Unit] key to unlock the display. The display will flash
“Ani”
twice and be
ready for the next animal.
•
To weigh a second animal press the [Tare] key if necessary to zero the display, and
place the next animal on the scale. It is also possible to simply place the next
animal on the scale without clearing the last value first. The scale will detect the
new weight and hold it as before.
•
The scale will remain in the animal weighing mode until the [Zero] key is pressed.
Then it will return to normal weighing.
10.9 ACCUMULATED TOTAL
The scale can be set to accumulate when a weight is added to the scale automatically or
manually by pressing [Print]. See Section 13.2.
NOTE:
1. The accumulation function is available only during weighing. It is disabled during
parts counting or percent weighing.
2. The accumulated weights will be stored in either kg or g, depending upon the
weighing unit in use.
3. If at any time the weighing units are changed, the accumulated data will be lost.