© Adam Equipment Company 2020
18
•
To count a different sample quantity, press the [Cnt] key. The display will
show the last used sample size. Either use this sample size with a different
part or enter a new sample size as above.
•
To return to weighing, press [Unit] when “
XX pcs
” is displayed.
10.5 CHECK-WEIGHING
Check-weighing is a procedure to display an indicator or sound an alarm when the weight
on the platform meets or exceeds the values stored in the memory. The memory holds
values for a high limit and a low limit. Either or both the limits can be set by the user.
NOTE:
1. The alarm can be set to OFF (See section 13.1). The LCD display will indicate
whenever the weight is within or exceeds the limits by changing the LCD
illumination to Amber, Green or Red.
2.
The limits can be locked by the manager. A Limit Password must be used to
change the limits or recall other limits from memory.
3. If Limit Password is enabled then enter the password which will allow you to
change the limits or the operation of the beeper.
Red
Mass on the platform is above the high limit
Green Mass is between the limits
Amber Mass is below the low limit
Summary of Contents for GBK 150Mplus
Page 1: ...Adam Equipment GBK Mplus GFK Mplus Series...
Page 3: ......
