© Adam Equipment Company 2020
32
13.0 PARAMETER SETTINGS
Pressing the [Func] key allows the user to access the parameters for customising the
scale. The parameters are split into 4 groups:
1. Check weighing parameters,
2. RS-232 parameters and
3. Scale parameters
4. Percent and Animal Weighing Functions
•
When [Func] is pressed, display will first show
“FUnC 1”
for Check weighing
parameters.
•
Enter [2] for RS-232 parameters or [3] for Scale parameters or [4] for percent
weighing and animal weighing, or press the [Func] key to advance through the
groups
“FUnC 1”, “FUnC 2” , “FUnC 3”
and
“FUnC 4”.
Press [Tare] to enter the desired
group of parameters.
•
Press [Zero] to return to the group
“FUnC 1”
. If you press [Zero] again, the scale will
exit the User Parameter section and return to normal weighing.
13.1
CHECK WEIGHING PARAMETERS
•
Shortcut to enter this group is to press and hold the [Unit] key for 4 seconds. The
display will go directly to
“FUnC 1”.
•
Press [Tare] to enter the group.
•
Press [Func] to scroll through the parameters and press [Tare] to enter a
parameter setting.
•
Press [Func] to view the options for setting.
•
Press [Tare] to confirm the change and then advance to the next parameter by
pressing the [Func] key.
Summary of Contents for GBK 150Mplus
Page 1: ...Adam Equipment GBK Mplus GFK Mplus Series...
Page 3: ......
