© Adam Equipment Company 2020
25
10.9.1
MANUAL ACCUMULATION
When the scale is set to manual accumulation, the weight displayed will be stored in the
memory when the [Print] key is pressed and the weight is stable.
•
Remove the weight and press [Print] when the scale is at zero. The display will
show
"ACC 1"
and then the weight in memory for 2 seconds before returning to
normal. The weight can be output to a printer or PC using the RS-232 interface.
•
When the scale is at zero place a second weight on the platform. When stable
press [Print] to accumulate the weight. The display will show
"ACC 2"
for 2 seconds
and then show the new total.
•
Continue until all weights have been added. This can continue for up to 99 entries
until the capacity of display is exceeded.
•
To view the total in memory press the [Print] key when the scale is at zero. The
display will show the total number of accumulation "ACC xx" and the total weight
before returning to zero.
•
To print the total, press [Print] to recall and then immediately press [Print] the
second time to print the results.
•
To erase the memory, press [Print] to view the total and then immediately press
[CE] to clear the memory.
Summary of Contents for GBK 150Mplus
Page 1: ...Adam Equipment GBK Mplus GFK Mplus Series...
Page 3: ......
