ADAM OPEL CD 300 Page 59 Manual Download

Page: 59 / 213

Speech recognition

In such a case you need to select

another language for the display if

you want to control the Infotainment

system via voice input. Changing

the display language, see

"Language" in chapter "System

settings"

21.

Address input for destinations in

foreign countries

In case you want to enter the address

of a destination located in a foreign

country via voice input, you need to

change the language of the

Infotainment display to the language

of the foreign country.
E.g. if the display is currently set to

English and you want to enter the

name of a city located in France, you

need to change the display language

to French.
Exceptions: If you want to enter

addresses in Belgium, you may

optionally change the display

language to French or Dutch. For

addresses in Switzerland you may

optionally change the display

language to French, German, or

Italian.

For changing the display language,

see "Language" in chapter "System

settings"

21.

Input order for destination addresses

The order in which the parts of an

address need to be entered using the

speech recognition system is

dependent on the country where the

destination is located.
■ Austria, Germany:

■ Belgium, France, Great Britain:

■ Italy, Netherlands, Portugal,

Russia, Spain, Switzerland:
<street> <house number> <city>

Usage

Activating speech recognition

Note

Speech recognition is not available

during an active phone call.

Press the

button on the right side of

the steering wheel.

The audio system mutes, the

symbol on the display is highlighted,

and a voice output message prompts

you to say a command.
As soon as the speech recognition is

ready for voice input, a beep is heard.
You can now say a voice command to

directly initiate a system function

(e.g. playing a radio station), or to

start a dialogue sequence with

several dialogue steps (e.g. entering

a destination address), see

"Operation via speech commands"

further below.
After a dialogue sequence is finished,

the speech recognition is deactivated

automatically. To initiate another

dialogue sequence, you must activate

the speech recognition again.

Adjusting the volume of voice

prompts

Press the

or ─ buttons on the right

side of the steering wheel.

Summary of Contents for CD 300






















































































































































































































Search results

Summary of Contents for CD 300

Reviews:

Related manuals for CD 300

Brands by name

Popular brands

ADAM OPEL CD 300, Manual

Search results

Summary of Contents for CD 300

Reviews:

Related manuals for CD 300

Brands by name

Popular brands