ADAM OPEL CD 300 Manual Download

Page: 162 / 213

162

Navigation

Editing a tour

Select a tour in the Tours menu then

select Edit tour to display a submenu

with the following options:

Show tour

Displays a list with all intermediate

destinations on the selected tour.
Move waypoints

Displays a list with all intermediate

destinations on the selected tour.
Mark the intermediate destination to

be moved.
Press the multifunction knob to cut

out the marked destination.

To insert the cut out destination at the

end of the list: press the multifunction

knob again.
To insert the cut out destination

before another destination: mark this

destination then press the

multifunction knob.
Delete waypoints

Displays a list with all intermediate

destinations on the selected tour.
Mark the desired intermediate

destination then press the

multifunction knob.
Confirm the displayed message.
Delete tour

Deletes the currently selected tour

entirely.
To execute deletion confirm the

displayed message.
Edit name

The name of the currently selected

tour can be edited using the speller

function

144.

Guidance

Press the NAVI button and then the

multifunction knob to display the

navigation main menu.
Depending on whether the route

guidance is currently inactive or

active, different menu options are

available.

Functions with route guidance

inactive

Start navigation

After selecting Start navigation the

menu shown below is displayed.

Summary of Contents for CD 300






















































































































































































































Search results

Summary of Contents for CD 300

Reviews:

Related manuals for CD 300

Brands by name

Popular brands

ADAM OPEL CD 300, Manual

Search results

Summary of Contents for CD 300

Reviews:

Related manuals for CD 300

Brands by name

Popular brands