ADAM OPEL CD 300 Manual Download

Page: 127 / 213

USB port

127

Important information

MP3 player and USB drives

■ The MP3 players and USB drives

connected must comply with the

USB Mass Storage Class

specification (USB MSC).

■ Only MP3 players and USB drives

with a cluster size smaller or equal

to 64 kB in the FAT16/FAT32 file

system are supported.

■ Hard disk drives (HDD) and are not

supported.

■ USB hubs are not supported.
■ The following restrictions apply for

the data stored on an MP3 Player

or USB device:
Maximum folder structure depth:

11 levels.
Maximum number of MP3/WMA

files that can be saved: 1000.
WMA files with Digital Rights

Management (DRM) from online

music shops cannot be played.
WMA files can only be played back

safely if they were created with

Windows Media Player version 8 or

later.

Applicable playlist

extensions: .m3u, .pls
Playlist entries must be in the form

of relative paths.
The system attribute for folders/

files that contain audio data must

not be set.

CD 400plus

In the centre console there is a USB

socket for the connection of external

audio data sources.
Devices connected to the USB port

are operated via the controls and

menus of the Infotainment system.

Note

The socket must always be kept

clean and dry.

Important information

The following devices can be

connected to the USB port:

■ iPod
■ Zune
■ PlaysForSure device (PFD)
■ USB drive

Note

Not all iPod, Zune, PFD or USB drive

models are supported by the

Infotainment system.

Summary of Contents for CD 300






















































































































































































































Search results

Summary of Contents for CD 300

Reviews:

Related manuals for CD 300

Brands by name

Popular brands

ADAM OPEL CD 300, Manual

Search results

Summary of Contents for CD 300

Reviews:

Related manuals for CD 300

Brands by name

Popular brands