ADAM OPEL CD 300 Page 63 Manual Download

Page: 63 / 213

Phone

phones is prohibited, if

interference is caused by the

mobile phone or if dangerous

situations can occur.

Bluetooth

The Phone portal is certified by the

Bluetooth Special Interest Group

(SIG).
You will find further information about

the specification on the Internet at

http://www.bluetooth.com

Bluetooth connection

Bluetooth is a radio standard for the

wireless connection of e.g. mobile

phones, iPod/iPhone models, or other

devices.
To be able to set up a Bluetooth

connection to the Infotainment

system, the Bluetooth function of the

Bluetooth device must be activated.

For further information, please

consult the user guide of the

Bluetooth device.

Via the Bluetooth menu, pairing (PIN

code exchange between Bluetooth

device and Infotainment system) and

connecting of the Bluetooth devices

to the Infotainment system are carried

out.

Important information

■ Up to five devices can be paired to

the system.

■ Only one paired device can be

connected to the Infotainment

system at a time.

■ Pairing normally only needs to be

carried out once, unless the device

is deleted from the list of paired

devices. If the device has been

connected previously, the

Infotainment system establishes

the connection automatically.

■ Bluetooth operation considerably

drains the device's battery.

Therefore, connect the device to

the power outlet for charging.

Bluetooth menu

To open the Bluetooth menu, you

may optionally:

■ Press the

button. Select the

Phone Settings menu item and

then Bluetooth.

■ Press the CONFIG button. Select

the Phone Settings menu item and

then Bluetooth.

■ Press the

;

button and select the

Config icon. Select the Phone

Settings menu item and then

Bluetooth.

The menu items Device list and Pair

device are displayed.

Pair device

To initiate the pairing process on the

Infotainment system, select the Pair

device menu item. A message with a

four-digit Infotainment system code is

displayed.
Initiate the pairing process on the

Bluetooth device. If required, enter

the Infotainment system code on the

Bluetooth device.

Summary of Contents for CD 300






















































































































































































































Search results

Summary of Contents for CD 300

Reviews:

Related manuals for CD 300

Brands by name

Popular brands

ADAM OPEL CD 300, Manual

Search results

Summary of Contents for CD 300

Reviews:

Related manuals for CD 300

Brands by name

Popular brands