ADAM OPEL CD 300 Manual Download

Page: 120 / 213

120

CD Player

■ Avoid leaving fingerprints when you

change CDs.

■ Put CDs back in their sleeves

immediately after removing them

from the CD player in order to

protect them from damage and dirt.

■ Dirt and liquids on CDs can smear

the lens of the CD player inside the

device and cause faults.

■ Protect CDs from heat and direct

sunlight.

■ The following restrictions apply for

the data stored on an MP3/WMA

CD:
Number of tracks: max. 999.
Number of folders: max. 255.
Folder structure depth: max.

64 levels (recommended: max.

8 levels).
Number of playlists: max. 15.
Number of songs per playlist: max.

255.

Applicable playlist

extensions: .m3u, .pls, .asx, .wpl.

■ This chapter deals only with playing

MP3 files since the operation for

MP3 and WMA files is identical.

When a CD with WMA files is

loaded MP3 related menus are

displayed.

Usage

Navi 600 / Navi 900

Starting CD replay

Push CD with the labelled side

upward into the CD slot until it is

pulled in.
CD replay starts automatically and

the Audio CD or Audio MP3 menu is

displayed.
If there is already a CD in the unit, but

the Audio CD or Audio MP3 menu is

not active:
Press CD/AUX button.
The Audio CD or Audio MP3 menu is

opened and CD replay is started.
Depending on the data stored on the

audio CD or MP3 CD differing

information about the CD and the

current music track will be shown on

the display.

Selecting a track

Turn the multifunction knob to display

a list of all tracks on the CD. The

currently played track is preselected.
Select the desired track.

Summary of Contents for CD 300






















































































































































































































Search results

Summary of Contents for CD 300

Reviews:

Related manuals for CD 300

Brands by name

Popular brands

ADAM OPEL CD 300, Manual

Search results

Summary of Contents for CD 300

Reviews:

Related manuals for CD 300

Brands by name

Popular brands