ADAM OPEL CD 300 Manual Download

Page: 197 / 213

Phone

197

The security dialogue is displayed.
Activating/Deactivating PIN request

Select PIN request On or Off.
Enter the PIN code of the mobile

phone SIM card and confirm.

Note

This option depends on the

individual network provider.

Changing the PIN code

Select Change PIN.
Enter the current PIN code. Enter the

new PIN code. Repeat the new PIN

code and confirm. The PIN has been

changed.
Configuring network services

Select Phone settings and then

Network services. The Network

services dialogue is displayed.
Depending on the network provider

and the mobile phone several options

are available.

■ Network selection: choose

between automatic or manual

network selection.

■ Call waiting: activate or deactivate

call waiting.

■ Call diverting: select diverting

options depending on the situation.

■ Call barring: configure call barring

options depending on the situation.

For details on network services

configuration refer to the mobile

phone manual or enquire with the

mobile network provider.
Configuring SMS centre number

The SMS centre number is a phone

number that acts as a gateway for

transferring SMS messages between

mobile phones. This number is

usually preset by the network

provider.
To configure the SMS centre number

select Phone settings and then SMS

center number. If required, modify the

SMS centre number.
Resetting the mobile phone to factory

settings

Select Phone settings and then

Factory settings.

CD 300 / CD 400plus

Bluetooth menu

Press the CONFIG button.
Select Phone settings and then

Bluetooth.
Activating Bluetooth

If the Bluetooth function of the Phone

portal is deactivated: set Activation to

On and confirm the subsequent

message.

Summary of Contents for CD 300






















































































































































































































Search results

Summary of Contents for CD 300

Reviews:

Related manuals for CD 300

Brands by name

Popular brands

ADAM OPEL CD 300, Manual

Search results

Summary of Contents for CD 300

Reviews:

Related manuals for CD 300

Brands by name

Popular brands