background image

en

 | 

6

 |  User guide | 

CP9680

 AutoScanner® Plus

573102 | REV. A | 07.2015

Bosch Automotive Service Solutions Inc.

WARNING

Risk of poisoning.

• 

Use this scan tool in locations with 
mechanical ventilation providing at 
least 4 air changes per hour. Engine 
exhaust contains odorless gas which 
can be lethal.

• 

Route the exhaust outside while 
testing with the engine running.

Poisoning can result in death or serious injury.

WARNING

Battery acid is a highly corrosive sulfuric acid.

• 

Safety goggles and protective gloves must be 
worn by the operator and any bystanders.

 

Even if your everyday glasses 
have impact resistant lenses, they 
are NOT safety glasses, and may 
not provide adequate protection.

• 

Make sure someone can hear you or is 
close enough to provide aid when 
working near a battery.

• 

Have plenty of fresh water and soap nearby.

 

If battery acid contacts skin, 
clothing, or eyes, flush exposed 
area with soap and water for 10 
minutes. Seek medical help.

• 

Do not touch eyes while working near battery.

Battery acid can burn eyes and skin.

WARNING

Risk of fire.

• 

Safety goggles and protective clothing must 
be worn by the operator and any bystanders.

 

Even if your everyday glasses 
have impact resistant lenses, they 
are NOT safety glasses, and may 
not provide adequate protection.

• 

Do not position your head directly in 
front of or over the throttle body.

• 

Do not pour gasoline down the throt-
tle body when cranking or running the 
engine, when working with fuel deliv-
ery systems or any open fuel line.

 

Engine backfire can occur when 
the air cleaner is out of position.

• 

Do not use fuel injector cleaning solvents 
when performing diagnostic testing.

• 

Keep cigarettes, sparks, open flame 
and other sources of ignition away 
from vehicle.

• 

Keep a dry chemical (Class B) fire 
extinguisher rated for gasoline, chemi-
cal and electrical fires in work area.

Fire can cause death or serious injury.

WARNING

Risk of flying particles.

• 

Safety goggles and protective gloves must 
be worn by the operator and any bystand-
ers while using electrical equipment.

 

Electrical equipment or rotating 
engine parts can cause flying particles.

 

Even if your everyday glasses 
have impact resistant lenses, they 
are NOT safety glasses, and may 
not provide adequate protection.

Flying particles can cause eye injury.

WARNING

Risk of burns.

• 

Batteries can produce a short-circuit 
current high enough to weld jewelry 
to metal.

 

Remove jewelry such as rings, 
bracelets and watches before 
working near batteries.

Short circuits can cause injury.

WARNING

Risk of burns.

• 

Do not remove radiator cap unless 
engine is cold.

 

Pressurized engine coolant may 
be hot.

• 

Do not touch hot exhaust systems, mani-
folds, engines, radiators, sample probe.

• 

Wear insulated gloves when handling 
hot engine components.

• 

Tester leads can become hot after extended 
testing in close proximity to manifolds.

Hot components can cause injury.

WARNING

Risk of expelling fuel, oil vapors, hot steam, 
hot toxic exhaust gases, acid, refrigerant 
and other debris.

• 

Safety goggles and protective clothing 
must be worn by the operator and any 
bystanders.

 

Even if your everyday glasses 
have impact resistant lenses, they 
are NOT safety glasses, and may 
not provide adequate protection.

• 

Engine systems can malfunction, 
expelling fuel, oil vapors, hot steam, 
hot toxic exhaust gases, acid, refriger-
ant and other debris.

Fuel, oil vapors, hot steam, hot toxic 
exhaust gases, acid, refrigerant and other 
debris can cause serious injury.

Summary of Contents for CP9680





















































Reviews: