Actron CP9680 User Manual Download Page 2

Page: 2 / 52

| User guide |

CP9680

AutoScanner® Plus

573102 | REV. A | 07.2015

Bosch Automotive Service Solutions Inc.

Serial No: __________________________________

SW ID: _____________________________________

HW Ver: ____________________________________

Boot Ver: ___________________________________

Prod ID: ____________________________________

Board ID: ___________________________________

Burn Date: _________________________________

Record the above information about your tool. The information is available

at Main Menu --> System Setup --> Tool Information. Provide this informa-

tion when contacting technical support.

If you have questions or concerns contact Technical Support:

Phone: 800-228-7667

E-mail: [email protected]

The information, specifications and illustrations in this guide are based on

the latest information available. Bosch reserves the right to make changes

at any time without notice.

Summary of Contents for CP9680





















































Search results

Summary of Contents for CP9680

Reviews:

Related manuals for CP9680

Brands by name

Popular brands

Actron CP9680, User Manual

Search results

Summary of Contents for CP9680

Reviews:

Related manuals for CP9680

Brands by name

Popular brands