en
|
3 2
| User guide |
CP9680
AutoScanner® Plus
573102 | REV. A | 07.2015
Bosch Automotive Service Solutions Inc.
ABS TPS B(%)
MIL STATUS
0.0
Off
Throttle Position B
If the
icon displays while a PID is selected press
to view graph. Press
to Return to PID
Screen.
Refer to “View Entire List.” on page 4-19 for instructions
on how to select PIDs to graph and how to view graph.
5. Return to Select Data to View Menu.
•
Press
.
6. Return to
Datastream Menu
.
•
Press
.
5.7
Record Data
The
Record Data
function records PIDs while vehicle is
parked or being driven. The
Record Data
function is
mainly used for diagnosing intermittent driveability
problems that cannot be isolated by any other method.
The recording time varies. A recording consists of frames
of data before the trigger and several frames after the
trigger.
CAUTION
Two people must be in vehicle when driving.
One to drive and the other to operate the
scan tool.
From
Datastream Menu
:
1. Select
Record Data
.
•
Use the
UP
and
DOWN
keys until
Record
Data
is highlighted.
•
Press
.
Datastream
View Data
Record Data
Component Locator
Acronyms
Review Data
Print Data
Code Lookup
System Setup
2. Follow all instructions on display.
•
The Scan Tool can maintain 5 recordings per
vehicle. If there are already 5 recordings stored,
the Scan Tool will ask which recording to over-
write.
•
Scan tool validates list of global PIDs from
vehicle.
Validating PIDs
Please Wait
Validating PID List
PID 116/329
3. Refer to
View Data
to setup
Custom List
or
View
Entire List
and
Pre-Trigger Setup
to set the number
of frames to keep prior to triggering the recording.
Select Data to Record
Entire Data List
Custom Data List
Pre-Trigger Setup
4. Press
to begin recording.
•
Data continues to be saved until either:
–
Record memory is full.
–
Operator presses
.
•
Scan tool recording times vary. A recording
consists of frames of data before trigger and
several frames after trigger.
Recording
Press ENTER to trigger
recording
Collecting pretrigger data
Recording
Press ENTER to end recording
Collecting data for frame #4
5. After recording, scan tool displays a prompt to
Playback Data.
•
Select
NO
to return to
Datastream Menu
.
•
Select
YES
to display recorded data.
•
Refer to “Recording” on page 17 for instruc-
tions on how to play back data.
