en
|
3 6
| User guide |
CP9680
AutoScanner® Plus
573102 | REV. A | 07.2015
Bosch Automotive Service Solutions Inc.
Special Tests
I/M Monitors
Drive Cycle Monitor
State OBD Check
MIL Status
O2 Monitor Tests
Diagnostic Monitor Tests
On-Board Systems
Vehicle Information
Charging System Monitor
•
Applicable diagnostic monitor tests are dis-
played.
2. Review test results displayed on scan tool.
•
Use the
UP
and
DOWN
keys until desired
result is highlighted.
•
Press
.
Select Diag Mon Test
Test $03
Test $49
Test $4A
Test $62
Test $76
Test $78
Test $81
Test $9A
Test $9B
Or, refer to appropriate vehicle service manual for
test IDs and definitions.
Select Diag Mon Test
O2 Sensor B1S1
O2 Sensor B1S2
O2 Sensor B2S1
O2 Sensor B2S2
Catalyst B1
Catalyst B2
EGR Mon B1
EVAP (0.090”)
EVAP (0.020”)
On Non-CAN vehicles the scan tool displays:
–
Test data (test ID)
–
Maximum value (MAX)
–
Test measurements (MEAS)
–
Minimum value (MIN)
–
Status (STS)
–
Measurements and Specification values are
hexadecimal numbers (i.e., $1A, $FE, $11.)
–
Module (MOD)
Test $03
ID
MOD
MAX
MEAS
MIN
STS
01
$09
----
00
00
OK
•
On CAN vehicles scan tool displays:
–
Test performed. The test performed can be
$## if test is not defined. Refer to vehicle
service manual for details.
–
Measured values and units of measured
(such as volts, amps, and seconds).
–
Status of monitor test data.
–
Module ID where the monitor test data
came from.
O2 Sensor B1S1
RICH-LN Thresh
MOD
MAX
MEAS
MIN
STS
$07
0.4497(V)
0.4497(V)
0.4497(V)
OK
3. Return to
Select Test
menu.
•
Press
.
4. Return to
Special Tests Menu
.
•
Press
.
5.12 On-Board Systems
The
On-Board Systems
test allows the scan tool to
control operation of vehicle components, tests or sys-
tems.
•
Some manufacturers do not allow tools to control
vehicle systems. A vehicle not supporting an on-
board system is identified by a message that is
displayed when selected.
•
Refer to the vehicle service manual for on-board
systems instructions.
•
The manufacturer is responsible for determining the
criteria to automatically stop test. Refer to appropri-
ate vehicle service manual.
From
Special Tests Menu
:
1. Select
On-Board Systems
.
•
Use the
UP
and
DOWN
keys until
On-
Board Systems
is highlighted.
•
Press
.
