en
|
2 2
| User guide |
CP9680
AutoScanner® Plus
573102 | REV. A | 07.2015
Bosch Automotive Service Solutions Inc.
CodeConnect® information . The power of CodeCon-
nect® is that repair information is vehicle and trouble
code specific and is based on the largest experience-
based database available .
CodeConnect®
information is available whenever
is visible on the display. It
has the potential of being
displayed while trouble codes are being displayed from
Read Codes or while Viewing Freeze Frame data. Also,
when you print codes to your PC, the
CodeConnect®
information, if available, will also be printed.
CodeConnect®
information is currently only available in
English, so if your tool is set to Spanish or French, don’t
be alarmed if your DTC text is in one language and your
CodeConnect®
information is shown in English.
How to use
CodeConnect®
:
1. When
is shown on the display, press the
key.
2. Scroll through the code-specific repair information.
•
Use the
UP
and
DOWN
keys to scroll one
line at a time.
•
Use the
LEFT
and
RIGHT
arrow keys to
scroll one screen at a time.
There are 3 levels of reported fixes:
Fix Level
Description
Top Reported Fix
More likely to be the solution over other
choices provided
Frequently Report-
ed Fix
As likely as other solutions
Also Reported Fix
Less likely than other solutions provided,
but worth considering.
Mass Or Volume Air Flow A
Circuit Low Input
MIL
Since last key cycle
Since DTCs erased
NOT REQUESTED
PASS/FAIL
PASS/FAIL
CURRENT
1/2
ECM $10
P0102
TOP REPORTED FIX
1-Replaced Mass Air Flow (MAF)
Sensor
FREQ REPORTED FIXES
1-Replaced Oxygen (O2) Sensor(
s)
2-Replaced Heated Oxygen Sensor
(HO2S) Bank 1 Sensor 1 (B1S1)
ALSO REPORTED FIXES
1-Replaced ENG 1 Fuse
2-Replaced Evaporative
Emissions (EVAP) Canister
Vent Solenoid/Valve
3-Replaced Ignition Switch
4-Replaced Intake Manifold
5-Repaired Mass Air Flow (MAF)
Sensor Connector
6-Replaced Powertrain Control
Module (PCM)
7-Programmed Powertrain Control
Module (PCM)
8-Cleaned Throttle Body
3. To return to the screen from which you pressed the
key, press
.
4.12 Code Criteria
The Code Criteria feature will detail the conditions
required for a DTC to be set by the vehicle. The vehicle is
constantly running self-tests on its systems. Code Crite-
ria will describe the conditions under which the vehicle
can initiate the test. These are called “Enable” criterion.
Code Criteria will also describe the the conditions that
will cause a DTC to set. These are called “Failure” crite-
rion. Code Criteria is not available for every DTC. Code
Criteria is currently only available in English, so if your
tool is set to Spanish or French, don’t be alarmed if your
DTC text is in one language and your Code Criteria
information is shown in English.
How to use
Code Criteria
.
1. When the
icon is shown on the display, press the
key.
2. Scroll through the Code Criteria information noting.
If a vehicle has multiple sets of criteria for the DTC,
a menu is displayed, so that the tool can provide the
most accurate criteria for your specific vehicle.
3. Use the
UP
and
DOWN
keys to scroll one line
at a time.
4. Use the
LEFT
and
RIGHT
arrow keys to scroll a
whole screen at a time.
•
To return to the DTC definition screen, press
.
Mass Or Volume Air Flow A
Circuit Low Input
MIL
Since last key cycle
Since DTCs erased
NOT REQUESTED
PASS/FAIL
PASS/FAIL
CURRENT
1/2
ECM $10
P0102
4.13 Acronyms
The
Acronyms
function allows the user to view acro-
nyms and abbreviations used by the scan tool.
