573102 | REV. A | 07.2015
Bosch Automotive Service Solutions Inc.
CP9680
AutoScanner® Plus
| User guide |
39
|
en
O2SCOMPX O2 Sensor Monitor Completion Counts
Bank x
O2SCONDX O2 Sensor Conditions Encountered
Counts Bank x
EGRCOMP
EGR Monitor Completion Condition
Counts
EGRCOND
EGR Monitor Conditions Encountered
Counts
AIRCOMP
AIR Monitor Completion Condition
Counts (Secondary Air)
AIRCOND
AIR Monitor Conditions Encountered
Counts (Secondary Air)
EVAPCOMP EVAP Monitor Completion Condition
Counts
EVAPCOND EVAP Monitor Conditions Encountered
Counts
•
If message INVALID displays on screen, the data
returned from the vehicle is incorrect, or is not
formatted in accordance with OBDII specifica-
tions.
4. Return to
Vehicle Information
menu.
•
Press
.
5. Return to
Special Tests Menu
.
•
Press
.
5.14 Oil Light Reset
The Oil Light Reset function allows the Scan Tool to
reset oil life to 100% and turn off the change oil light.
This function will only appear on the Special Tests menu
when supported by the currently selected vehicle.
From
Special Tests Menu
:
1. Select
Oil Light Reset
.
•
Use the
UP
and
DOWN
keys until
Oil Light
Reset
is highlighted.
•
Press
.
Special Tests
I/M Monitors
Drive Cycle Monitor
State OBD Check
MIL Status
O2 Monitor Tests
Diagnostic Monitor Tests
On-Board Systems
Vehicle Information
Oil Light Reset
2. Follow the instructions displayed. They will vary
depending on the vehicle.
•
Press
.
Oil Service Reset
Cycle key, Turn engine off, Key
on
Press BACK to exit
Press ENTER to continue
3. Reset oil light.
•
Press
.
Oil Service Reset
Press ENTER to continue
Press ENTER to reset
BACK to exit
4. After the command is sent, the oil light should be
off.
•
Press
to return to the
Special Tests Menu
.
Oil Light Reset
Press ENTER to continue
Command sent
5.15 Battery Reset
The Battery Reset function allows the Scan Tool to tell
the vehicle that the battery has been replaced. This
function will only appear on the Special Tests menu
when supported by the currently selected vehicle. Reset-
ting the battery system when a new battery is installed
allows the vehicle to customize charging to the age and
condition of the battery.
Battery Information
The vehicle may contain either a lead-acid battery or an
AGM (absorbed glass mat) battery. Leadacid batteries
contain liquid sulphuric acid and can spill when over-
turned. AGM batteries also contain sulphuric acid, but
the acid is contained in glass mats between the terminal
plates.
If the original battery is replaced with a different type of
battery (eg. a lead-acid battery is replaced with an AGM
