Actel ProASIC3/E, User Manual, Page: 65 / 106

Step 8 – Program the Device
ProASIC3/E Starter Kit User’s Guide and Tutorial 65
To save the log file:
1. From the File menu, click Save Log . The Save dialog box will appear, as shown in Figure 7-49 .
Figure 7-49. Save Log File Dialog Box
2. Select a directory, type in the file name, and click Save . The FlashPro software saves the file.
Check Functionality of Tutorial Design
After programming the device, you will see “ACTEL A3PE STARTER KIT” display on the LCD panel as well as
flashing LEDs. There are 6 switches (SW) equipped with special functions.
Press SW1 to Asyn_Clear on the flashing LEDs and the LCD panel.
Press SW6 to change the LEDs from flashing to counting.
Press SW3 to Asyn_Load the counter.
Press SW2 to change the up counter to down counter.
Press SW4 for LEDs manual clock.
Press SW5 for LCD manual clock.