Actel ProASIC3/E, User Manual, Page: 54 / 106

Quick Start Tutorial
54 ProASIC3/E Starter Kit User’s Guide and Tutorial
5. Click the Compile icon. Leave the default Compile settings ( Figure 7-31 ) and click OK .
Figure 7-31. Compile Options Window
Designer compiles the design and shows the utilization of the selected device. Also, note that the Compile icon in
Designer turns green, indicating that the compile has successfully completed.
6. Once the design compiles successfully, use the I/O Attribute Editor tool to assign the pin for subsequent place-and-
route runs. Click the I/O Attribute Editor to open the tool. It opens in the MultiView Navigator user interface, as
in Figure 7-32 on page 54 .
7. See the Libero IDE or Designer online help for more information on the I/O Attribute Editor or MultiView
Navigator.
Figure 7-32. I/O Attribute Editor in MultiView Navigator
8. Assign a pin number to all of the signals, then select Commit from the File menu and close the I/O Attribute Editor.