Actel ProASIC3/E, User Manual, Page: 64 / 106

Quick Start Tutorial
64 ProASIC3/E Starter Kit User’s Guide and Tutorial
3. Click the Execute button in the toolbar. The Execute Action dialog box will appear, as shown in Figure 7-47 .
Figure 7-47. Execute Action Dialog Box--Verify
The default settings appear in the Execute Action dialog box.
4. Click Execute to start the verification process. A successful verification will result in Exit 0, as shown in Figure 7-48
on page 64 . If the STAPL file is different from the file used for programming, Exit 11 will appear in the Log window.
Note: Do not interrupt the verifying sequence, it may damage the device.
Figure 7-48. Successful Verification
Note: If you have an A3PE600 device on board, you will see A3PE600 in the Device list.
Saving Your Log File
All FlashPro3 results are displayed in the Log window. Save these results into a file.