Actel ProASIC3/E, User Manual, Page: 52 / 106

Quick Start Tutorial
52 ProASIC3/E Starter Kit User’s Guide and Tutorial
Once the compilation completes, the simulator runs for 1000 ns and a Wave window opens to display the simulation
results.
2. From the ModelSim menu, Simulate > Run > Run All to execute the full simulation time defined in the testbench.
3. Scroll in the Wave window to verify that the counter works correctly. Use the zoom buttons to zoom in and out as
necessary.
Step 5 – Implement the Design with Designer
After creating and testing the design, the next phase is implementing the Design using the Actel Designer software.
1. Click Designer Place-and-Route in the Libero IDE Design Flow window, or right-click Top.vhd in the Design
Hierarchy tab and select Run Designer . Designer ( Figure 7-28 ) reads in the design file and opens the Device Selection
Wizard ( Figure 7-29 on page 53 for A3PE600 and Figure 7-30 on page 53 for A3P250).
Figure 7-28. Designer GUI