ACS-CONTROL-SYSTEM GmbH
l Lauterbachstr. 57 l D-84307 Eggenfelden l www.acs-controlsystem.de l [email protected]
17
5. Setting up the device
15
5.4.2. General device parameters
Menu level
Parameterisation level
Display time,
DISEC:
Default:
01.0
The display is set up with
[
▲
] [
▼
]
. Thereby it switches up to 1 second in increments of 0.1
seconds and up to 10.0 seconds in increments of 1.0. With
[P]
the selection is confirmed and
the device changes into menu level.
Rounding of display values,
round:
Default:
00001
This function is for instable display values, where the display value is changed in
increments of 1, 5, 10 or 50. This does not affect the resolution of the optional outputs. With
[P]
the selection is confirmed and the device changes into menu level.
Arithmetic,
ArItH:
Default:
n0
With this function the calculated value, not the measuring value, is shown in the display. With
no
, no calculation is deposited. With
[P]
the selection is confirmed and the device changes into
menu level.
Sliding average determination,
AVG:
Default:
1.0
Here, the number of the meterings that need to be averaged is preset. The time of averaging
results of the product of measuring time
SEC
and the averaged metering
AVG
. With the selection
of
AVG
in the menu level
DISPL,
the result will be shown in the display and evaluated via the
alarms.
Menu group level
Menu level
then
Reciprocal
Root
extraction
Square
