ACS-CONTROL-SYSTEM GmbH
l Lauterbachstr. 57 l D-84307 Eggenfelden l www.acs-controlsystem.de l [email protected]
13
11
5. Setting up the device
Menu level
Parameterisation level
Activation / deactivation of the programming lock or completion of the standard
parameterisation with change into menu group level (complete function range),
run:
Default:
uloc
Choose between the deactivated key lock
Uloc
(works setting) and the activated key lock
Loc
, or
the change into the menu group level
ProF
with the navigation keys
[
▲
] [
▼
]
. Confirm the
selection with
[P]
. After this, the display confirms the settings with
"
- - - - -"
, and automatically
switches into operating mode. If
Loc
was selected, the keyboard is locked. To get back into the
menu level, press
[P]
for 3 seconds in operating mode. Now enter the
CODE
(works setting
1234
)
that appears using
[
▲
] [
▼
]
plus
[P]
to unlock the keyboard.
FAIL
appears if the input is wrong.
To parameterise further functions
ProF
needs to be set. The device confirms this setting with
„
- - - - -
„
and changes automatically in operation mode. By pressing
[P]
for approx. 3 seconds in
operation mode, the first menu group
InP
is shown in the display and thus confirms the change
into the extended parameterisation. It stays activated as long as
ULOC
or
LOC
is entered in menu
group
RUN
.
5.4. Extended parameterisation
(Professional operation level)
Menu level
Parameterisation level
Selection of the input signal,
TYPE:
Default:
sens.u
There are several measuring input options: 0-20 mA, 4-20 mA or 0-10 VDC signals as works
calibration (without application of the sensor signal) and
SenSU
(voltage)
or
SENSA
(current) as
sensor calibration (with the sensor applied). Confirm the selection with
[P]
and the display
switches back to menu level.
Menu group level
Menu level
5.4.1. Signal input parameters
5.3. Programming interlock „
RUN
“
