ACS-CONTROL-SYSTEM GmbH
l Lauterbachstr. 57 l D-84307 Eggenfelden l www.acs-controlsystem.de l [email protected]
28
5. Setting up the device
26
Menu level
Parameterisation level
Alarms for relay 5,
CoM-5:
Default:
a.5
The allocation of the alarms to relay 5 happens via this parameter, one alarm or a group of
alarms can be chosen. With
[P]
the selection is confirmed and the device changes into menu
level.
Back to menu group level,
rEt
:
With
[P]
the selection is confirmed and the device changes into menu group level
„–rel–“
.
Menu group level
5.4.7. Alarm parameters
Menu level
Menu level
Parameterisation level
Dependency alarm 1,
ALrM.1:
Default:
actua
The dependency of
alarm.1
can be related to special functions, in detail these are the current
measuring value, the min-value, the max-value, the totaliser value/sum-value, the constant
value or the difference between the current measurand and the constant value. If
Hold
was
selected, the alarm is hold and processed just after deactivation of
HOLD
.
EHtEr
causes the
dependency either by pressing the
[O]
-key on the front of the housing or by an external signal
via the digital input. With
[P]
the selection is confirmed and the device changes into menu level.
Example:
By using the maximum value
Alarm.1
=
Max.va
in combination with a threshold monitoring
Fu-1 = High
, an alarm confirmation can be realised. Use the navigation keys, the fourth key or the
digital input for confirmation.
….
