ACS-CONTROL-SYSTEM GmbH
l Lauterbachstr. 57 l D-84307 Eggenfelden l www.acs-controlsystem.de l [email protected]
30
5. Setting up the device
28
Menu level
Parameterisation level
Totaliser state,
total:
Default:
off
The totaliser makes measurements on a time base of e.g. l/h possible, at this the scaled input
signal is integrated by a time and steadily (select
Stead
) or temporarily (select
temp
) saved.
Select the constant storage for consumption measurements and the quick storage for
frequently filling processes. During the constant storage
STEAD
the current sum value is saved at
each totaliser reset. Furthermore it is saved every 30 minutes in the not-quick storage of the
device. If
Off
was selected, the function is deactivated. With
[P]
the selection is confirmed and
the device changes into menu level.
Time base,
t.base:
Default:
sec
Under this parameter the time base of the measurement can be preset in seconds, minutes or
hours.
Totaliser factor,
Facto
:
Default:
1e0
At this, the factor (1E0…1E6) respectively the divisor for the internal calculation of the
measuring value is assigned.
Setting up the decimal point for the totaliser,
tot.dt:
Default:
0
The decimal point of the device can be adjusted with the navigation keys
[
▲
] [
▼
]
. With
[P]
the
selection is confirmed and the device changes into menu level.
Menu group level
5.4.8. Totaliser (Volume metering)
Menu level
…
