manualshive.com logo in svg

ACP OMNISTIM 500A, User Manual

Share
Download
ACP OMNISTIM 500A User Manual Download Page 40

   40                                                                                                                                                  OMNISTIM

®

 500A USER MANUAL 

 

    

 

COPYRIGHT 2001 - 2007, ACCELERATED CARE PLUS CORP., ALL RIGHTS RESERVED 

CONFIDENTIAL AND PROPRIETARY 

 

2.    Adjustable Parameters 

Pushing the set button during operation brings up the available adjustable parameters. These may be altered during 
system operation. To adjust any parameter simply push the parameter set button at any time during operation. This 
will display a parameter that may be changed. Repeated pushing of the parameter set button will continue to 
display parameters one at a time until all parameters have been displayed. To change the parameter use the 
timer/parameter set rocker switch on the front panel to increase, decrease or change the value of the parameter. 

 

Adjustable Parameters 
PULSE RATE:

  

 

Adjustable from .1 - 125 Hz 

INTERPHASE INTERVAL:

  Adjustable from 10 to 250 microseconds. 

ON - OFF RAMPS:

    

Adjustable from 0 to 9.9 sec 

ON - OFF TIME:

 

 

On time adjustable from 0-30 seconds, off time adjustable from 0-199 seconds 

AUTO INTENSITY:

  

Adjusts the output during treatment automatically from 0 to 20% user programmable. 

 
 

 

 

 

 

 

 
 
 
 
 
 
 

HVPC OUTPUT 

PULSE 

RISE TIME 

>500 

NANOSECONDS

 

INTERPHASE 

INTERVAL 

100 

MICROSECONDS 

0-250 

VOLTS 

HIGH VOLTAGE PULSED CURRENT WAVEFORM:

 

Continuous or surged operation with fully adjustable ON and 
OFF times and ramps allow applications of HVPC therapy.  
Reduction of edema, pain control, NMES and soft tissue 
management programs can be set up with the 

OMNISTIM

®

 

500’s high volt pulsed current mode.

 

Summary of Contents for OMNISTIM 500A































































Reviews:

No comments

Brands by name

Popular brands

Load more brands