Acopia Adaptive Resource Switch, Cli Maintenance Manual

Page: 88 / 324

Metadata Utilities: nsck and sync
Showing Metadata
5-8 CLI Maintenance Guide
1. The start time, namespace, volume, and path for the report.
2. A table of namespace shares that were examined, along with the IP of the
back-end filer and the share name at the filer.
3. A legend of keys for the next table.
4. A table of files and directories in the metadata. For each file/directory, the table
shows three fields:
a.
Type
is a list of file types (shown as keys from the legend above),
b.
Share
is the filer-share name with the file, and
c.
Path
is the exact path of the file on the share, relative to the share’s root.
5. A summary list with various totals.
For example, the following command sequence exits to priv-exec mode, dumps all
physical file locations for the ‘wwmed’ namespace, and reviews the report:
bstnA6k(gbl)# end
bstnA6k# nsck wwmed report metadata-only
Scheduling report: metadata_only.4.rpt on switch bstnA6k
bstnA6k#
show reports metadata_only.4.rpt
**** Metadata-Only Report: Started at Wed Dec 7 09:51:08 2005 ****
**** Namespace: wwmed
**** Volume: /acct
**** Path: /acct
Share Physical Filer
-------------------- ----------------------------------------------------------
[budget ] 192.168.25.19:/exports/budget
[bills ] 192.168.25.25:/work1/accting
[bills2 ] 192.168.25.23:/data/acct2
[it5 ] 192.168.25.24:/lhome/it5
**** Legend:
**** FL = File: The reported entry is a file.
**** DR = Directory: The reported entry is a directory.
**** LN = Link: The reported entry has a link count greater than one.
**** NL = No Lock: Was unable to lock parent directory during report.
**** CC = NFS case-blind name collision.
**** IC = Name contains invalid CIFS characters.
**** FN = Name appears to be filer-generated.
**** NM = Name contains characters that are not mappable to the NFS encoding.